Does home decoration construction disturb residents and cause neighborhood conflicts? Using gypsum board system to reduce noise and make it more environmentally friendly

Does home decoration construction disturb residents and cause neighborhood conflicts? Using gypsum board system to reduce noise and make it more environmentally friendly

For neighbors, the most difficult thing to accept about home decoration is the continuous noise disturbance during the process. Generally, residential buildings have a renovation period of up to two to three months, and more than half a year. Occasionally, they make crazy noises, which may exacerbate neighborhood conflicts if not taken seriously. It can also lead to the collapse of neighborhood relationships before moving in, making it awkward. Jason's gypsum board editor will analyze the sources of noise in home decoration engineering projects, as well as how to reduce the possibility of noise generation through alternative processes and achieve more environmentally friendly interior decoration effects.

Firstly, every household may have the opportunity to renovate, so it is important to empathize with others when renovating, and also consider the feelings of neighbors when renovating one's own home. It is important not to go too far and to minimize the amount of renovation noise. At the same time, we need to distinguish the time periods and carry out construction within the time periods allowed by regulations and government recommendations. At present, most first and second tier cities in China will introduce the "Measures for the Prevention and Control of Social Life Noise Pollution". The approximate allowed time for residential decoration is from 8:00 to 18:00 during the working day, and construction cannot be carried out at night or on rest days. This is very important, and I believe that construction within the allowed time can also be better understood by neighbors.

In addition, there are construction projects that can cause serious noise and corresponding solutions. The following will provide a detailed analysis:
       1. Dismantle old projects. If it is a second-hand house renovation or old house renovation, this is unavoidable. But unless there are large areas of hollowing, cracking, and peeling on the original wall powder masonry layer (cement layer), it is not necessary to remove it to the brick layer. Keeping the original powder masonry layer only requires the operation of the wall scraping project. This can reduce a lot of noise caused by demolition

。

2. Hydroelectric project slotting. This is also the project that is most likely to cause noise disturbance to the residents, because using electric hammers and cutting machines to cut grooves directly on the wall, noise and vibration directly affect the downstairs and neighboring residents through the wall, and it is also the construction node that is most likely to cause resentment from neighbors. What methods can be used to reduce the workload of slotting in hydropower projects? It's actually quite simple, especially in the case of second-hand house renovation and renovation, all water pipes and strong and weak electrical conduits need to be laid on the top surface, and then a layer of "card type keel gypsum board ceiling system" can be made to avoid the majority of water and electricity slotting. Moreover, due to the smaller thickness of the card type keel system itself compared to ordinary gypsum board ceilings, it occupies less floor height and is not easy to cause a sense of oppression. At the same time, due to the elimination of a large amount of labor costs for slotting and patching plastering, the construction cost of making suspended ceilings is relatively acceptable.

3. Woodworking project. Although woodworking may not produce as much noise as water and electricity slotting, prolonged on-site woodworking and woodworking machinery can still cause noise and dissatisfaction among neighbors. In fact, the content of on-site carpentry construction required for home decoration projects is becoming less and less, gradually replaced by finished door sets (door and window frames) and home whole house customization. At present, a large amount of woodworking operations are still needed mainly for the construction of suspended ceilings and base boards. It is strongly recommended to abandon the traditional method of using wooden square keel and fine wood board as the base layer. Except for some irregular shaped suspended ceilings, it is recommended to make light steel keel as much as possible.

For the base board, it is recommended to use Jason Uber board (high-performance gypsum based fiberboard). This not only reduces the on-site processing of many wooden products, but also has the following advantages: the material level from the inside out is truly environmentally friendly, the fire resistance performance of the wooden base plate cannot be compared, the nail holding force level of the wooden base plate is comparable, the better moisture-proof and crack proof performance is not easy to deform, and the durability improvement is not only doubled. Jason's gypsum board editor suggests that if alternative processes and materials can be used in these areas, it can not only reduce the noise generated during the decoration process, but also improve the quality of decoration construction, killing two birds with one stone.
(Some of the images are from the internet. If there is a possibility of infringement, please contact the editor to delete them.)