Should the decoration period be fast and the construction quality be good? How to have both, new building materials can achieve

Should the decoration period be fast and the construction quality be good? How to have both, new building materials can achieve

As the saying goes, fish and bear's paw cannot be eaten at the same time. In the field of interior decoration engineering, it often manifests as a contradiction between construction quality and target construction period. But this is precisely the contradiction that many projects must overcome due to various needs, causing many engineering students to go crazy and have to run and not eat grass. In fact, construction quality and schedule depend on three factors, which are interrelated: building materials, process methods, and worker technical level. And the most controllable aspect from the front-end is building materials, which is bound to be the starting point. Below, Jason gypsum board editor will analyze the research and development and breakthroughs of new building materials in technology.

In interior decoration projects, the most urgent aspect of the project schedule is often the tooling project, such as office, exhibition hall, and shop projects. The requirements for home decoration are often not too high in terms of construction period, while fixtures are relatively high because it involves the issue of rent free decoration period. Delaying the construction period by one more day is equivalent to paying an extra day of rent. Therefore, fixture projects naturally need to shorten the construction period as much as possible. However, no matter how short the construction period is, it cannot be achieved at the cost of reducing the level of construction quality, which is also a consensus.

In this way, the logic is actually very clear. The best way to shorten the construction period is to shorten or reduce the time spent on the process without affecting the later use. Studying how to achieve this goal from the perspective of building materials has also become a research direction for major building material production enterprises. Jason gypsum board, as a foreign-owned enterprise, has invested a large amount of manpower and resources in the research and development of new building materials over the years, and has achieved remarkable results in the industry. Here we will introduce two new types of gypsum based products, which have brought remarkable improvements in simplifying the process and shortening the construction period.

1、 Jason Lightweight Plaster Gypsum&Jason Gypsum Base Self leveling.
      As both gypsum based products, lightweight plastering gypsum is mainly used for wall plastering and leveling, replacing traditional cement mortar. In terms of craftsmanship, not only does it eliminate the multiple traditional leveling processes required for using cement mortar, but it can be directly sprayed and smoothed in one step. In terms of initial and final setting time, it also saves more than half of the time compared to traditional cement mortar leveling. At the same time, due to the inherent cementitious properties of gypsum based products, there is no need to add any building adhesive, achieving essentially formaldehyde free materials.
      Gypsum based self leveling is used for leveling the ground, replacing traditional cement-based self leveling. Similarly, the setting time is much faster than that of cement-based self leveling, which can also save more than half of the time. And it is lighter, reducing the possibility of cracking while also being more load-bearing friendly for buildings.

2、 Jason bonded gypsum veneer wall system&Jason Gixiang decorative panel.
      This is also a compatible combination for wall treatment and decoration. Traditional wall treatment nodes need to achieve maximum progress
To achieve a smooth and beautiful appearance, especially without cracking, it is necessary to use methods such as wall scraping, powder masonry leveling, interface agents, hanging nets, batch embedding leveling, internal and external corner protection strips, second batch embedding, latex paint primer, latex paint topcoat, or wall decoration such as wall covering and hard and soft packaging. And this layer by layer of wall treatment requires waiting for it to dry, which means the entire painting process will drag on for a long time, and there is no rush.
       The home decoration is still fine, but the tooling cannot be done step by step according to the complete painting process. Therefore, many tooling projects deliberately reduce the number of steps that should have been done at the painting node, as long as the final finished surface is decent. But this approach may lead to problems such as cracks, hollowing, and peeling on the wall after several months or a year of use.

If the project schedule requirements are high, the use of gypsum board veneer wall system can be considered in the early design stage. Especially when on-site construction conditions permit, it is entirely possible to use the Jason bonded gypsum veneer wall system, which will minimize costs, minimize construction steps, and shorten the construction period. At the same time, using Jason Jixiang decorative board instead of traditional paper-based gypsum board, as it already has a complete decorative surface, means that after the gypsum board is applied, it only needs to be sealed with metal strips. It is equivalent to doing nothing on the basis of the original cement wall or the old wall that has not been dismantled. Simply roughen it up with adhesive plaster and apply decorative panels to complete the work. The resulting wall is the final finished surface and can be directly inspected and put into use. It can be said that it is currently one of the fastest and most effective process methods for wall treatment.

While greatly shortening the construction period of the fixture project, Jason's gypsum board editor also shares with you two additional benefits. 1. Almost completely eliminating the possibility of wall cracking, increasing the effective service life of fixture interior decoration projects, and objectively reducing the cost of enterprises; 2. Based on the inherent performance of gypsum based products, they are truly environmentally friendly building materials without formaldehyde, benzene, and phosphorus. Therefore, increasing the application of gypsum based products in tooling projects can effectively improve the indoor air quality of the tooling space. This benefit is particularly important for office workers.
(Some of the images are from the internet. If there is a possibility of infringement, please contact the editor to delete them.)